Each brand of elevators and different elevator manufacturers have different basic functions.And different elevator types also have different basic functions.
Now let’s start to learn the basic function of passenger elevators.
1.Five Party Talk
Computer room / control room / car cabin/ car platform/ car top the five party distributed with wire cable and telephone.
2.With/without driver
In the driver's operation state, the elevator outside the hall of the call can be registered.And the driver can control the door of the elevator to start or close, choose the direction of operation and whether the response to the outside call instruction.
3.Elevator button in car cabin to control the elevator
Through the function button to keep the door open or close,and control the operation of the elevator.
4.Hall button
Call the elevator through the hall button,and keep the elevator door open.
5.Cancel wrong commands
Can cancel the wrong commands by false operation of the passengers.
6.Anti-nuisance when light load
When the elevator loading not exceed 20% of the rated capacity,and the number of instructions within the elevator is greater than the system set value, elevator system will determine the occurrence of a trick at this time.Anti trick function of elevator will open automatic,and the elevator will cancel all the commands after response to the recent floor after the internal instruction.
7.Parking function
The elevator automatically returns to the base station and closes the standby mode when no call instruction is registered.
8.Closing time setting:Closing time can be set in advance.
9.Call button embedded in self diagnosis function
10.Repeat closing function
When the elevator is blocked during the closing process,will repeat the closing action.
11.Automatic function of self rescue in fault
The elevator can be automatically operated at low speed (15m/min),and stop at the nearest service floor to open the door.
12.Directly stop
13.Full load straight drive
14.Overload protection
15.Over speed protection
16.Cut off lightening and fan in car when no passengers.
17.Return to ground floor
18.Elevator machine room requirements fast running
19.Elevator machine room rescue operation function
20.Elevator fault self diagnosis function
When there is a failure of the elevator, the elevator automatic monitoring of the causes of the failure, location and status, and the failure to make timely breakdown of the registration and classification.
21.Faulty history record
22.Cabin arrival gong
Some elevator companies make this function as optional.
23.The fire control function of landing operation
In the case of a building fire, the elevator can be automatically returned to the fire evacuation layer through the fire signal, so as to ensure the safety of the elevator passengers.
24.Self learning control function
25.Car camera monitoring function
26. Service floor setting
27.Light curtain protection
28.Door switch fault protection
29.Base station (ground floor) lock control function
30.Group control function
This function is parallel function,to make use of the two elevators in the common hall to cooperate with each other.
31.Elevator remote monitoring
32.Auto rescue device
When the electric power off , run the elevator to the nearest service floor in lower speed through emergency power supply.
Only a few of china elevator companies use this as basic function.
33.Car top overhaul operation function
34.Car door overtime automatic closing function
35.Power cut emergency lighting function(30 minutes)
没有评论:
发表评论